Advertiser 21 telescoping fiberglass flagpole.

Always Open Banner Pole™
Telescoping flagpoles and flags
Made In The USA, and Guaranteed!
“Official Manufacturer's Web Site”
1-800-707-3524

Full graphics

Holds vinyl banner wide open!

18' High

Call us toll free 800-707-3524, and find out how easy it is to order and display your custom banner.

Always Open Banner Pole™
Telescoping 84" opens to 18' .
Will not rust, and requires no maintenance.
Includes one 24" ground tube.
Banner Arm.
Gold vinyl ball.
Heavy duty nylon carry bag.
Open & close with a twist of the wrist.
Weighs under 14 pounds!
Telescopic sections adjust to variable heights.
No ropes to break or beat on the pole.
Banner & Pole set: $295.00

503-585-1179

"If it doesn't say Wonder Pole®, it can't do it all."
It's guaranteed to work!

Why you should purchase a Wonder Pole^® and not an imitation.

Layer One
Longitudinal Strands

Layer Two
Circumferential Wrap

Layer Three Longitudinal Strands

Layer Four
Continuous Strand Mat

Layers Five and Six
2 plys of
Highest Quality Nexus® Veil

6-ply Laminate Lay Up
Engineered Composite

Circumferential Wrap for strength.

Over-draw stop markers on each section.

100% satisfaction guarantee.

8 styles & sizes to choose from.

Sure Lock™ grips for variable size control.

As manufacturer we stock & supply.

Made by us in the USA.

How to use the Always Open Banner Pole™:
The Always Open Banner Pole is designed to effortlessly display your banner indoors or outside. Because of its strength it can accommodate various types of materials, even vinyl. The banner arm extends through the pole and will accommodate up to 28" wide banners. There are not grommets, or other gadgets used to secure the banner, and there is no need for a lower banner arm. The banner slips over and onto the pole with the cross bar sliding into the top banner pocket. The visual appearance is increased by about 25%. The look is cleaner and the banner appears larger, increasing its overall impact. The The Always Open Banner Pole comes with a heavy duty nylon carry bag and there are only two parts. You can hand carry everything you need and setup in minutes. Use our optional Base 2410 or the Wheel Stand Pro24 for additional support. The Banner Pole will rotate in the wind but not "spin" like other poles. A 24"ground tube is supplied with the pole or use our optional Wheel Stand 24Pro or water filled base. The Always Open Banner Pole may also be fastened to an existing fence, tents or sign posts using steel banding, etc. Be sure to place the ground tube between any metal to protect the fiberglass pole. Use at your open house, store fronts, tailgating parties, indoor and outdoor events to draw attention. Take this pole camping, or anywhere you want to raise one or more flags and banners!

How to mount your flags on the Always Open Banner Pole™:
The Always Open Banner Pole can accommodate various substrates, and size banners or flags. The most common sizes are 2x4', 2x6', and 2x8'. Your banner is constructed with two pole sleeves, one at the top of the banner and one on the pole side. If you have your own sign or flag maker we can supply the instructions for sewing them. The banner is slipped over and onto the pole, and the cross bar is inserted through the pole and into the top pole sleeve. This keeps the banner always open and taught. That is all there is to it; no unsightly grommets, cords or elastics to snap back, and break. Show your colors, and get attention. There are no tools required, and it takes only seconds to setup.

How to store the Always Open Banner Pole™:
Your Wonder Pole is maintenance free and does not require any special storage. First, remove the crossbar, slide the banner off of the pole, close the pole and your done. Everything fits into the carry bag. If you prefer the pole can be left up inside or outdoors. Because we do not use cam locks or friction fittings our Always Open Banner Pole will not jam. No tools are required and it is Proudly made in the USA!

Always Open Banner Pole™ Specifications:
We use a series of 3fiberglass tube sizes that nest inside of each other and will telescope up to 18'. The pole height is maintained by use of our Sure Lock™ grips. The telescopic flagpole has a base section that is 2" in diameter, 1.75" mid-section, and a 1.5"" top section making it strong, light, and portable. The pole weighs approximately 12 pounds. The pole sections are made from Circular Wound Fiberglass with a 1/8 inch wall thickness which provides exceptional strength. Because the Always Open Banner Pole is constructed of fiberglass the electrical hazards commonly associated with metal flagpoles is reduced, and is maintenance free. No chipped paint or rusting will occur.

Maintenance of the Always Open Banner Pole™:
There are no fittings to assemble or store, and the entire unit is maintenance free. It will not chip, peel, or rust. It is constructed of fiberglass, and assembled at our facilities.

Always Open Banner Pole™ Guarantee:
The Wonder Pole® is guaranteed for 1 full year and we will replace any part of the pole or the entire unit should failure under normal use occur.
Shipping: The Wonder Pole® ships UPS or USPS right to your door.

Back to Top of telescoping pole page
Residential and Commercial Telescoping Flagpoles, and adjustable poles is our business, Thank you for visiting our site.

CONSTRUCTION:
Our exclusive "Circ" wound poles are the strongest in the industry. The method of construction prohibits the line cracking of the fiberglass pole, which is common in poles with only longitudinal strands. Like a crack in your windshield, it will keep going until the pole fails. The Wonder Pole will not. The high quality Nexus^® Veil prevents fiber bloom (fiberglass slivers). We also include a UV inhibitor. Our "Sure Lock" grips are factory molded, and press fitted on the pole. No glue or rivets are used to hold the fittings on the pole. Wonder Pole^®, the best fiberglass telescopic pole made today.

SPECIFICATIONS:
The first layer of our pole incorporates a high quality Nexus^® veil and longitudinal strands for inner wall strength and stabilization. The second layer has a circumferential wrap to increase rigidity and hoop strength. Ordinary telescoping fiberglass poles do not have circumferential wrapping. The third layer has additional longitudinal strands on top of the first and second for extra material support and strength. Layer four is an electrical grade continues strand mat, which imparts multi-directional strength throughout the fiberglass Wonder Pole®. Layers five and six have 2 plys of high quality Nexus^® veil to prevent fiber bloom and supply the unsurpassed finish that comes with every Wonder Pole^®. How can you tell if it is a Wonder Pole^®? Ask for it by name, and get the 1 year guarantee.
Back to Top of telescoping pole page.

"If it doesn't say Wonder Pole^®, it's not the best telescoping pole"

Copyright Wonder Pole, all rights reserved for telescoping Flagpoles

“If it doesn't say Wonder Pole, it's not the strongest fiberglass pole made.”